Choose a Vehicle:






Powered by:



(interested in sponsoring)
Toll Free 888-582-TRNi (8764)
facebook twitter linkedin Wordpress
Tech Forum New Problem
Member Help Request
David Kitchens
08/19/16
2007 HONDA ODYSSEY, neutrals in 3RD after overhaul
The problem now is the customer installed the unit and now it shifts 1-2 neutral. I have disassembled the transmission and do not see any prob...
0 comments open
Chris Nunnelee
01/31/16
Login to give a Wrench
2003 ACURA MDX, No 3rd gear
1-2 shirt ok 2-3 neutralize 4-5 shift ok Code 4 pressure switch. Change 4 and 3 pressure switch.and same problem
1 comments closed w/fix
Jesse Bounting
10/14/15
Login to give a Wrench
1997 FORD F-250 PICKUP, will not shift into 2nd until after 3000 rpm unless you let off of accelerator or manual shift
after overhaul trans will not shft into second gear until after 3000 rpm unless you let up off accelerator or shift it manualy !!!
0 comments closed w/fix
Mike Bishop
08/11/15
Login to give a Wrench
1959 CHEVROLET IMPALA, FRONT SEAL BLOW OUT
TRANS WAS INSTALLED INTO CAR, CAR DROVE UP ROAD FINE. WENT TO BACK INTO TRAILER AND SEAL BLEW OUT AGANIN. TRANS ON BENCH NOW AND CANT FIND AN...
2 comments closed w/fix
Chris VanGelder
06/22/15
2004 CHEVROLET TRAILBLAZER, blown transmission pump
this vehicle has had 2 previous transmission rebuilds, both times te pump has been blown.
5 comments open
Murrell Roderick
05/14/15
Login to give a Wrench
2003 BMW 745LI, no reverse
will not back up when hot.it fall into to failsafe.
2 comments closed w/fix
Shell McMillian
04/08/15
2005 FORD EXPLORER, Cooler flow from both trasmission lines
we pulled the cooler lines and got about a 4 to 1 flow from both ports top heaver flow , has anyone else seen this ?
3 comments open
Steve Fuller
04/08/15
2002 FORD F-150 PICKUP, test
test
0 comments open
Steve Fuller
03/27/15
2009 CHEVROLET AVEO5, 123
ghghj
0 comments open
John Giammarco
12/06/14
2003 FORD F-250 SUPER DUTY PICKUP, Slipping on 4-5 shift
this truck neutrals on the 4-5 shift and sets the codes p2703 friction element D apply time range for functional error detected. P0730 gear ra...
2 comments open
Tom Nicotera
12/05/14
Login to give a Wrench
2004 HYUNDAI SANTA FE, harsh 2;3 shift only
went through relearn fine but nomatter what we do cant get rid of harsh 2-3 shift
1 comments closed w/fix
Mike Bishop
11/05/14
Login to give a Wrench
2007 DODGE RAM 2500, no 4th
no 4th. no pressure at the o/d pressure port. line pressure normal. solenoid checks out electrical and is getting turned on. (used current cla...
0 comments closed w/fix
Kevin Leue
07/31/14
2004 DODGE RAM 1500 PICKUP, limp mode
vehicle is all time limp mode.codes present 869,846,871,888.trans control relay always off.searched data base found 2 wiring issues,but wiring...
2 comments open
Brandon Self
06/25/14
2001 DODGE RAM 2500 PICKUP, Overheats
While test driving the vehicle the trans temp went to 244 degrees.We brought it back to the shop and all of the cooler lines were room temp (n...
2 comments open
Stephen Sired
05/02/14
2004 CHRYSLER 300M, harsh 3-2 coast
rebuild left for 2 weeks came back hard coast down 3-2 , 2-4 cvi goes to 6 and no codes
1 comments open
Steve Smith
04/19/14
1993 CHEVROLET K3500 PICKUP, No TCC apply
ECM is not grounding tcc circuit when commanded.
5 comments open
Mike Bishop
03/09/14
Login to give a Wrench
2005 FORD EXPEDITION, 1st gear drop out
Truck was driven on 2 separate test drives and worked perfect. Went to take it on a 3rd just for fun and truck has now started this. Take of f...
0 comments closed w/fix
Chris Nunnelee
12/24/13
1999 BMW 323I, leaks from breather
pouring fluid out of breather while engine is running and it is not getting hot.
1 comments open
Richard Pharr
12/03/13
Login to give a Wrench
2000 FORD RANGER, spring mix up
does anyone know off hand if the weaker spring is for the o.d. servo or the intermediate?
4 comments closed w/fix
Jere Fere
11/27/13
2006 NISSAN PATHFINDER, GEARS NOT ENGAGING
AFTER ONE MONTH TRANSMISSION BINDING AND NO GEARS FWD/REV..UPON REMOVAL TORQUE CONVERTER HUB DAMAGED, PUMP GEARS SPLIT..REPLACE PUMP ASSY TWIC...
1 comments open
Chris Wardrop
11/14/13
Login to give a Wrench
2001 ISUZU TROOPER, bind on 1-2 and jerks
now ist a no go with a bing when it shifts into second, and it jerks like if wants to release. 3rd, 4rd, come in too ealy around 15mph. Feels ...
1 comments closed w/fix
Don Cigelske
10/25/13
Login to give a Wrench
2008 TOYOTA SIENNA, 1-2-Neutral
This appears to be a straightforward innternal failure. I plan on obtaining an exchange rebuilt. Question 1) Does the complete drivetrain (Cra...
2 comments closed w/fix
Jessica Lopez
09/06/13
2004 FORD EXPLORER, no L/U
no lock up and burns torque converter.
2 comments open
Chris Wardrop
08/26/13
Login to give a Wrench
2000 VOLKSWAGEN JETTA, noise in first only
now back with a noise on take off from a stop. in first gear only. when second gear come in it goes away.
1 comments closed w/fix
Chris Wardrop
08/06/13
Login to give a Wrench
2005 KIA SEDONA, 5-4 harsh down shifts
now it drops erratin out of 5-4 and 4-3 at crusing speeds.
3 comments closed w/fix