Choose a Vehicle:
Fix Database New Problem
| Member | Help Request |
|---|---|
|
Johnny Valdez
07/07/11
|
2006 GMC SAVANA 2500, tcc will not engage inless 99% duty cycle while monitoring on road test noticed tcc% climbs to 65-70% and slip is still 250 to 300. at that point goes to 99% and then slip speeds go to...
0 comments
open
|
|
Orville Bolin
06/30/11
Login to give a Wrench
|
2003 FORD FOCUS, no line pressure 50lbs line pressure rise to 70 when stall then after it runs a minute we loose 20 more pounds
any idea what I am missing
1 comments
closed w/fix
|
|
Chris Wardrop
06/28/11
Login to give a Wrench
|
1997 MITSUBISHI DIAMANTE, delay engagements and now we have a dealay engagement in drive and reverse and a late harsh downshift. I notice when it came to shop I had no comunication with...
0 comments
closed w/fix
|
|
Rodolfo Gonzalez
06/28/11
Login to give a Wrench
|
1999 FORD EXPLORER, Hard bump to 3rd Now customer came back complaing about third gear. It feels like a firm bump when it shifts. I readjusted the bands and checked the valve body...
4 comments
closed w/fix
|
|
Bryan Braddock
06/23/11
|
2000 CHEVROLET S10 PICKUP, Wont shift I am looking for the diagram for the fix for PO758. I have reviewed the fix on this site, but I cant find the diagram for the power relay syst...
6 comments
open
|
|
Joe Zahn
06/22/11
|
2000 DODGE RAM 2500 PICKUP, no up shift no upshift / no gov pressure , about 35 on the dutycycle / do have 5v supply / also a reoccuring code 1693, don't know what that is
6 comments
open
|
|
Chris Wardrop
06/20/11
Login to give a Wrench
|
1999 FORD F-350 SUPER DUTY PICKUP, shutters in reverse Strong Shutter in reverse only on strong acceleration or going up a driveway.
10 comments
closed w/fix
|
|
Billy Crawford
06/18/11
Login to give a Wrench
|
2001 CHEVROLET BLAZER, No Lok-up P1860 sets while rolling in reverse and drive. Going at even less than 10 mph. A 2004 Avalanche has just come in with the same problem. Wha...
6 comments
closed w/fix
|
|
Mike Bishop
06/14/11
Login to give a Wrench
|
2005 FORD E-250 ECONOLINE, 4-3 forced downshift clunk on a 4-3 kickdown (with accel pedal) it it very harsh.
(rattles van) if u kick it right to second it works perfect. if u us o/d cancel butt...
4 comments
closed w/fix
|
|
Gerard Reed
06/11/11
Login to give a Wrench
|
2005 FORD FIVE HUNDRED, bang shifts hard accel. from standstill a hard tire barking 2nd then the next time you stop and take off exactly the same way the shift is smooth and norm...
2 comments
closed w/fix
|
|
Javier Lopez
06/06/11
Login to give a Wrench
|
2001 HONDA ACCORD, leaks leaks out of the vent tube
4 comments
closed w/fix
|
|
Christopher Geraghty
06/01/11
|
2005 MERCURY MONTEGO, trans downshifts hard trans
1 comments
open
|
|
Joe Olivera
05/31/11
|
2005 DODGE DURANGO, transfercase shifting by its self with key off
1 comments
open
|
|
Charles Schlosser
05/31/11
Login to give a Wrench
|
2000 DODGE DURANGO, Car dies at stop sign When driving the car must hit at least 2nd gear before problem will occur. When coming to a complete stop the TCC applies and kills the motor....
3 comments
closed w/fix
|
|
Charles Schlosser
05/31/11
|
2000 DODGE DURANGO, Car dies at stop sign When driving the car must hit at least 2nd gear before problem will occur. When coming to a complete stop the TCC applies and kills the motor....
4 comments
open
|
|
Todd Bryan
05/25/11
|
2001 MITSUBISHI ECLIPSE, 3rd gear bang bad
0 comments
open
|
|
Chris Wardrop
05/25/11
Login to give a Wrench
|
2001 NISSAN MAXIMA, 2-3 SLIPP it only happens on crusing speeds I did a line press test and is tested good 70psi on idle and 180psi on stall. but when I road tested the car...
5 comments
closed w/fix
|
|
Mike Bishop
05/24/11
Login to give a Wrench
|
2004 DODGE RAM 2500 PICKUP, think i have the wrong parts this trans should be a 48re and the of the parts look right but the pump stator has no ring grove. think they may have boxed up the wrong one ...
4 comments
closed w/fix
|
|
Chris Wardrop
05/20/11
Login to give a Wrench
|
1999 FORD E-350 ECONOLINE, REVERSE SHUTTER Revese shutter only under load when holding brake pedal or backing up into driveway or incline.
1 comments
closed w/fix
|
|
Chris Wardrop
05/20/11
Login to give a Wrench
|
1999 FORD F-350 SUPER DUTY PICKUP, Reverse shutter strong shutter in reverse under load, holding brake pedal or backing up on driveway. I there something I might might of miss? I realy need you...
6 comments
closed w/fix
|
|
Mark Lepkowski
05/19/11
Login to give a Wrench
|
1998 ACURA CL, 2-3 flare cold 2-3 flare colds works fine after 10 minutes of driving. Tried replacing computer no change turned up linear solenoids no change. Could use som...
5 comments
closed w/fix
|
|
Chris Wardrop
05/18/11
Login to give a Wrench
|
2000 HONDA CIVIC, NO LOCK UP There is a command and a signal to the tcc sol. but no drop on rpm when tcc is aplied by pcm. we clear the code and it will take weeks to come...
1 comments
closed w/fix
|
|
Jeffery Funk
05/16/11
Login to give a Wrench
|
2006 FORD EXPLORER, No Move in OD Position wFix If shifter is placed in the OD position vehicle will not move, feels like nuetral.
2 comments
closed w/fix
|
|
Richard Pharr
05/13/11
Login to give a Wrench
|
1999 CHEVROLET C3500 PICKUP, CODE 1860 LOSES 4TH GEAR AND LOCK UP AFTER STOP vehicle shifts fine even has lock up when first driven as soon as you come to a stop and start off again it will not have 4th gear or lock up ...
6 comments
closed w/fix
|
|
Jose Fuentes
05/13/11
Login to give a Wrench
|
2002 VOLKSWAGEN JETTA, doesn't shift no shifts after coming to a stop.
5 comments
closed w/fix
|