Original Customer Complaint:
Current Customer Complaint:
Work Completed This Visit:
I overhauled this unit,found the foward clutches burnt and the shaft seal torn in foward drum,pump gears had signs of damage where upon installation of engine i suppose the convertor wasn't properly engaged so i replaced the original 7 vane w/ 10 vane rotor resealed the unit cleaned the V.B. and installed her, now it moves and shifts but 2nd is at 40mph and 3rd is at 65mph nice and firm i might add but with no overdrive even at high speeds. I played around with the T.V. cable and no changed in points can be made! Any ideas will be greatly appreciated guys, Thanks Jamie
Ok guys thanks for all the replies,sorry for the delay we have been swamped and it has been difficult to get back to you guys.As i informed you before the T.V. spring kit helped and yes a cut 2-4 servo o-ring fried my new band so i installed a new band and still no OD so i'm gonna check my ciruits and see what's shakin' there. I will report back soon thanks again you all have been extremely informative.