1993 CHEVROLET C2500 PICKUP, 4L80-E

N/A

N/A

N/A

none

no codes

Original Customer Complaint:
car was towed in no movement
Current Customer Complaint:
harsh engagement onto reverse
Work Completed This Visit:
Total rebuild execpt epc parts store did not have one
Summary:
Car came in no movement we went threw it replaced rear planet ,kit,tcc all the good stuff. I could not get a new epc parts store was out. Truck shifts fine in all the gears but when you put it in reverse it goes in hard. The truck idle's at abot 900 rpm seems to high.going to get a new epc today and try it. need some help i've never had this before, also we had to rplace wiring harness inner and outer .I dont know but i'm pretty sure the wires are all hooked up right. Thanks

does anyone have the part#for the transgo kit yall are talking about?I checked all the pressures and they are ok, i did put a transgo shift kit in it .I didnt take out the wave spring i relaced it with a new one. And no i didnt bore out the afl bore .the transgo sk-4l80e-bI think i've found outwhat the problem is , when putting the shift kit in it has the tough boltand washer ibelieve i put it in the wrong place . I think i put in the reverse/center support hole ,i dont know if it makes a difference or not but going to switch them out and put them the way they need to be.

Login Now to read this Fix