cooler line blew off and customer drove it till it smoked.
none
Problem
Rebuilt transmission and now has no rev and a bind up on the 3 -4 shift. Have pulled unit verified stackup in the input drum, replaced the switch (reads good on scanner) again,replaced solenoid again, checked vb for stuck valves. Dont have air test plate for the 606 so air tested the input drum using the pump & OK. The LR and 2/4 air checked OK also. Removed power from unit and still no reverse. One thing strange is that the input speed sensor does not read in neutral or park as normal, it does read normal when wheels are turning. (wires not swapped) Help!! Note r&r guy dropped trans off of the jack about 3 feet. This may have something to do with it, but I can't seem to find it...