When in od position slips unless you are light on the throttle after moving good till 4th
None
This trans was rebuild two years ago and when I tore it apart it looked as if it had been running with low oil pressure. most clutches burnt. 2nd and 3rd fried.
none
Problem
I discovered that it had a leak in the 2nd feed curicut. I pulled the valebody and pressure ck the clutch it help pressure well, so I knew that it was in the V/B. When I followed the passages out I discovered that the wrong gasket was used on the top v/b plate. According to what I can discover this trans is a 4r70w but the gasket it need for the vb is a beaded one for the Aode. it has been running the same wrong gskt in the previous build. I think someone has put an earlier vb in it. Now I have the above problem after putting the right gskt in. I am not sure this vb will work. can some one tell me?