2001 FORD ESCAPE, CD4E

N/A

N/A

N/A

Complete rebuild with the new forward /direct drum Transgo shift kit and solenoids

Had code741 lockup stuck off

Original Customer Complaint:
Slipping forward and reverse with fluid coming out of filler tube customer plugged the vent thought it was vacuum Lake.
Current Customer Complaint:
It never left
Work Completed This Visit:
I pressure tested the trans it had 90 pounds in reverse and 75 in Drive I pulled the valve body and went back through it and found nothing wrong. I went ahead and change the low and reverse accumulator and checked all the valves including the reverse modulator. The 1-2 shift and bypass, they all look good still had a hard reverse pulled out trans and checked the low reverse wave made sure it was in the right position and checked all my clearances. Everything looked good, still has hard reverse in the morning, I will try to change back to the original solenoids
Summary:
When I road tested this vehicle. It backed out of the shop fine and drove beautifully on the road test. When I got back to the shop and try to pull into one of the bays reverse was very firm. If you turn the vehicle off and let it sit for 5 or 10 minutes the first reverse engagement is fine. Every one after that is hard

Login Now to read this Fix