2005 GMC SIERRA 2500 HD, 4L80-E
By: Mike Bishop On: 09/29/09
7 comments
Vehicle
2005 GMC SIERRA 2500 HD, 4L80-E
Vehicle Information
30000
KMS
5.3
L
-1
N/A
N/A
N/A
Problem Information
N/A
N/A
N/A
NONE
NONE
Problem
Original Customer Complaint:
GEAR NOISE IN 1ST GEAR ONLY. SHIFT TO 2ND IT GOES AWAY
Current Customer Complaint:
WE THOUGHT IT HAD STRAIGHT CUT GEARS SO WE TORE DOWN THE UNIT TO REPLACE THEM WITH HELICAL CUT AND FOUND HELICAL CUT GEARS ALREADY THERE. NO PROBLEMS FOUND IN ENTIRE UNIT.
Work Completed This Visit:
UNIT STILL APART
Summary:
ANYTHING WE CAN CHECK???
GEAR NOISE IN 1ST GEAR ONLY. SHIFT TO 2ND IT GOES AWAY
Current Customer Complaint:
WE THOUGHT IT HAD STRAIGHT CUT GEARS SO WE TORE DOWN THE UNIT TO REPLACE THEM WITH HELICAL CUT AND FOUND HELICAL CUT GEARS ALREADY THERE. NO PROBLEMS FOUND IN ENTIRE UNIT.
Work Completed This Visit:
UNIT STILL APART
Summary:
ANYTHING WE CAN CHECK???
Update
does anyone have the part#for the transgo kit yall are talking about?I checked all the pressures and they are ok, i did put a transgo shift kit in it .I didnt take out the wave spring i relaced it with a new one. And no i didnt bore out the afl bore .the transgo sk-4l80e-bI think i've found outwhat the problem is , when putting the shift kit in it has the tough boltand washer ibelieve i put it in the wrong place . I think i put in the reverse/center support hole ,i dont know if it makes a difference or not but going to switch them out and put them the way they need to be.
Problem Fix
Login Now to read this Fix
Login now to view the comments
closed w/fix
Subscribe for updatesVehicle Data
2005 GMC SIERRA 2500 HD
| Mileage | 30000 KMS |
| Engine | 5.3 L |
| Trans | N/A |
| Trans Type | 4L80-E |
| Drive | N/A |
 |
 |
Toll Free 888-582-TRNi (8764)
